Product name : Photovoltaic junction box (non-filling)
Product model :ZS-BOX08-ab
Main technical characteristics:
1 Maximum system voltage: DC1500V
2 Maximum working voltage: 100V
3 rated pulse voltage: 16000V
4 Current Rating: 12A
5 Pollution degree: 2
6 Ambient temperature: -40°C~85°C
7 Protection level: Class II
8 Cable specifications: 4mm 2
9 Protection level: IP68
10 TUV certification standard: IEC 62790
11 Connector: ZS-CC01, certified by TUV 1500V according to IEC 62852
Steps for usage:
1 Make a ring of adhesive along the groove on the bottom of the case (black line shown below).
2 Route the busbar through the 4 threading holes on the bottom of the junction box and the junction box onto the component backplane.
3 Weld the busbar and the terminal of the junction box terminal firmly. The welded busbar should be pressed down as much as possible to avoid touching the cover. Note: The 4 reflow zones are not accessible to each other.
4 Close the cover (4 clips at the front, rear, left and right).
5 If you need to open the cover, use a word to force the four clamps.
